It
would be impossible to visit or live in Indonesia and not be exposed
to one of the country's most highly developed art forms,
batik. On your first visit to a batik store or factory you
will undoubtedly experience an overwhelming stimulation of
the senses - due to the many colors, patterns and the actual
smell of batik. Only through repeated visits and a bit of
study will the types of designs and their origins become apparent.
The word batik is thought to be derived from the word 'ambatik' which translated means 'a cloth with little dots'. The suffix 'tik' means little dot, drop, point or to make dots. Batik may also originate from the Javanese word 'tritik' which
describes a resist process for dying where the patterns are
reserved on the textiles by tying and sewing areas prior to
dying, similar to tie dye techniques. Another Javanese phase
for the mystical experience of making batik is “mbatik manah” which means “drawing a batik design on the heart”.
A Brief History
Although
experts disagree as to the precise origins of batik, samples
of dye resistance patterns on cloth can be traced back 1,500 years
ago to Egypt and the Middle East. Samples have also been found
in Turkey, India, China, Japan and West Africa from past
centuries. Although in these countries people were using the
technique of dye resisting decoration, within the textile
realm, none have developed batik to its present day art form
as the highly developed intricate batik found on the island of
Java in Indonesia.
Although
there is mention of 'fabrics highly decorated' in Dutch
transcripts from the 17th century, most scholars believe that
the intricate Javanese batik designs would only have been
possible after the importation of finely woven imported cloth,
which was first imported to Indonesia from India around the
1800s and afterwards from Europe beginning in 1815. Textile
patterns can be seen on stone statues that are carved on the walls of
ancient Javanese temples such as Prambanan (AD 800), however
there is no conclusive evidence that the cloth is batik. It
could possibly be a pattern that was produced with weaving
techniques and not dying. What is clear is that in the 19th century
batik became highly developed and was well ingrained in
Javanese cultural life.
Some
experts feel that batik was originally reserved as an art form
for Javanese royalty. Certainly it's royal nature was clear as
certain patterns were reserved to be worn only by royalty from
the Sultan's palace. Princesses and noble women may have
provided the inspiration for the highly refined design sense
evident in traditional patterns. It is highly unlikely though
that they would be involved in any more than the first wax
application. Most likely, the messy work of dyeing and
subsequent waxings was left to court artisans who would work
under their supervision.
The Process of Making Batik - Step by Step

Step 1
The
first wax is applied over the penciled-in outline of the pattern.
Almost always the original cloth is white or beige.

Step 2
The
cloth is dyed in the first dye bath. In this case the first dyebath
is indigo blue. The area of the cloth where the wax was
applied in Step 1 will remain white.

Step 3
Second
application of wax is applied. In this case it is a dark brown
color. A poorer quality of wax is used to cover larger areas
of cloth. The darker color helps to differentiate it
from the first wax applied. Any parts that are covered
with this wax application will remain the indigo
color.

Step 4
The
cloth is dyed in the second dye bath. In this case it is a navy
blue. Any areas that are not covered by wax will become
dark blue.

Step 5
All
the wax that has been applied thus far is removed. This is done
by heating the wax and scraping it off and also by applying
hot water and sponging off the remaining wax.

Step 6
Wax is applied to the area of the fabric that the artist wishes to remain the indigo blue color.

Step 7
Wax is applied to the area of the fabric that the artist wishes to remain white.

Step 8
The
fabric is submerged in the final dye bath. In this case it is
brown. Any areas of the cloth that have not been covered with
wax will become brown.
Step 9
The finished cloth after all of the wax has been removed.
Batik Design Tools
Although the art form of batik is very intricate, the tools that are used are still very simple. The canting,
believed to be a purely Javanese invention, is a small thin
wall spouted copper container (sometimes called a wax pen)
that is connected to a short bamboo handle. Normally it is
approximately 11 cm. in length. The copper container is filled with
melted wax and the artisan then uses the canting to draw the design on the cloth.
Canting have
different sizes of spouts (numbered to correspond to the
size) to achieve varied design effects. The spout can vary from
1 mm in diameter for very fine detailed work to wider spouts used to
fill in large design areas. Dots and parallel lines may be
drawn with canting that have up to 9 spouts. Sometimes a wad of cotton is fastened over the mouth of the canting or attached to a stick that acts as a brush to fill in very large areas.
1. Canting Batik
In
response to a request from a visitor to this site .. we've
put together this page on the Canting Batik ... the traditional
Indonesian tool that is used to apply wax in fine dots and lines on
a cloth. Wherever the wax is applied, the cloth resists the
next dye bath that it is put in .. leaving the white dot/line
(or another color if the cloth has already been dyed).
Though the size of most canting are similar .. the difference is
in the "tip" that allows the wax to flow from the "bowl".
Bigger holes in the tip allow wider lines and bigger dots.
The wajan is
the container that holds the melted wax. It looks like a
small wok. Normally it is made of iron or earthenware. The wajan is placed on a small brick charcoal stove or a spirit burner called an 'anglo'. The wax is kept in a melted state while the artisan is applying the wax to the cloth.
3. WAX
Different
kinds and qualities of wax are used in batik. Common waxes
used for batik consist of a mixture of beeswax, used for its
malleability, and paraffin, used for its friability. Resins can
be added to increase adhesiveness and animal fats create
greater liquidity. The best waxes are from the Indonesian
islands of Timor, Sumbawa and Sumatra; three types of
petroleum-based paraffin (white, yellow and black) are used.
The amounts mixed are measured in grams and vary according to the
design. Wax recipes can be very closely guarded secrets. Varying
colors of wax make it possible to disguise different parts of
the pattern through the various dying stages. Larger areas of
the pattern are filled in with wax that is cheaper quality
and the higher quality wax is used on the more intricately
detailed sections of the design.
The
wax must be kept at the proper temperature. A wax that is too
cool will clog the spout of the canting. A wax that is too hot will
flow too quickly and be uncontrollable. The artisan will often
blow into the spout of the canting before applying wax to
the cloth in order to clear the canting of any obstructions.
4. CAP
Creating
batik is a very time consuming craft. To meet growing demands
and make the fabric more affordable to the masses, in the
mid-19th century the . cap. (copper stamp - pronounced chop) was
developed. This invention enabled a higher volume of batik
production compared to the traditional method which entailed
the tedious application of wax by hand with a canting.
Each cap is a copper block that makes up a design unit. Cap are
made of 1.5 cm wide copper stripes that are bent into the shape
of the design. Smaller pieces of wire are used for the dots. When
complete, the pattern of copper strips is attached to the
handle.
The cap must
be precisely made. This is especially true if the pattern is
to be stamped on both sides of the fabric. It is imperative
that both sides of the cap are identical so that pattern will be consistent.
Men usually handle the application of wax using cap. A piece of cloth that involves a complicated design could require as many as ten sets of cap. The usage of cap, as opposed to canting, to apply the wax has reduced the amount of time to make a cloth. Today, batik quality is defined by cap or tulis, the second meaning hand-drawn designs which use a canting, or kombinasi, a combination of the two techniques.
MORE INFORMATION:
SELL UNIQUE CLOTH
email :noorjingga@gmai.com
Phone /SMS/WhatsApp: (+62)8121561972


